or 4 payments of This is the KAMIKAZE V2 tire from Procircuit. This tire has been designed for clean and compacted surfaces regardless the grip level, with a flat rubber design to maximize ground contact.
This tire is another design looking for long life with a large number of tightly packed pins. Small pins and in groups of 4 in order to leave some space between them to improve the performance even on fine dust conditions. All pins have a small cut in the middle to improve the flexibility. Thanks to these cuts we get a better grip and easier to drive feeling.
The V2 series features a new insert to better fit the new tire structure improving the overall performance with more consistent handling in the bumps, effortless jumping and an easy to drive feeling.
COMPOUNDS
Available in C1 Super Soft (white), C2 Soft (yellow), C3 Medium (orange), C4 Hard (blue), K1 Clay Super Soft (pink), K2 Clay Soft (red), S1 Super Soft (white double dot), S2 Soft (yellow double dot) and S3 Medium (orange double dot) compounds. K1, K2, S1, S2 and S3 compounds are only available unlgued without insert and rim.
Procircuit’s K1 and K2 clay compounds provide maximum efficiency and grip on indoor clay tracks, oily tracks, hard packed dirt tracks with a high level of humidity or even on mixed tracks with synthetic surfaces such as carpet, astroturf, concrete, slippery curves or cobblestones.
K compounds work differently from C standard compounds. While C compounds are very dependent on the temperature and grip, the performance of K compounds depends on the grip and the surfaces.
With the K compounds we achieve greater driving stability because the rubber is not as elastic as the C compound and centrifuges less at full throttle.
Gluing recommendation:
C and K compounds: Wipe the gluing area with a clean cloth and brake cleaner. Then, using another clean cloth, wipe again with Procircuit Green Tire Cleaner part # PC0015. Use a fresh Procircuit’s Tire Glue to ensure a perfect bond. Part # PC0012
S compounds: Only sand the rubber, no cleaning is necessary. Use a fresh Procircuit’s Tire Glue to ensure a perfect bond.
